With the rapid alterations in weather temperatures in recent years, we must protect our houses and infrastructures with high-quality insulating materials. Due to this level of commitment, deciding which brand to buy from the many options on the market becomes quite challenging.
Kingspan insulation is one of the insulation materials on the market that has been evaluated and is considered to perform well in house insulation. Furthermore, to assist you in finding a solution, we have identified the materials that would best fit different areas of your home.
What Are the Types of Kingspan Insulation?
Kingspan is made in various types to cater to different uses and areas.
-
Thermal Insulation
Thermal insulation is a high-performance PIR insulation. Its thermal performance could be better than the Kooltherm range. It can be used in many new and existing building applications.
-
Kingspan Kooltherm
Primarily created for residential and business insulation, Kingspan Kooltherm has great tolerance, unmatched efficiency, and a variety of phenolic insulating materials that are incredibly long-lasting. Kooltherm sheets have the lowest potential thermal transmittance of any item in the industry.
It is also extremely resistant to water vapour. It accumulates as little as 2% of humidity. It has a strength of approximately 175 kPa. All Kooltherm variants are made using blowing agents that have 0% ODP and a low GWP, making them environmentally benign.
-
Kingspan GreenGuard
Kingspan GreenGuard insulation is an XPS insulation developed for specialty applications that require heavy-duty, strong insulation. It comes in various high compressive load grades to accommodate multiple service demands.
Kingspan Insulation for Different Areas of Your Home
Kingspan is among the world’s most well-known and reputable insulating board producers. They provide insulation for both residential and commercial floors.
Floor Insulation
Floor insulation is a critical consideration that must be addressed. Kingspan K3 is the finest material for floor insulation. It has a glass tissue texture and heat conduction of 0.021-0.020 W/mK. Kingspan Styrozone is another option. Its adjustable thickness spans from 30mm to 140mm, allowing it to be utilised anywhere in your home.
In addition, the Kingspan TF70 line is developed explicitly for the floors of its buildings. In addition, it contains a thermostat core on both sides and a foil-faced heat resistance of 0.022 W/mk. The Kingspan TF70 panel is the most popular floor insulation in the line of Kingspan.
Internal Partitions
Internal walls must be exceptionally well insulated since various circumstances may cause thermal loss, which could result in issues like wetness. Kooltherm k17 is used to protect interior walls. It is composed of plasterboard on the front and glass tissue polyiso on the back. Thermal conductivity ranges between 0.02 and 0.19 W/mK. Furthermore, like k17, this is also intended for interior wall insulation. It has plasterboard on one side and foil composition on the other. Thermal conductivity varied between 0.02 and 0.19 W/m.K.
Outside Walls
While we are preoccupied with interior insulation, it’s also critical to consider exterior wall insulation. Kooltherm k5 panel is intended only for outside wall insulation, particularly with cladding systems and dry brick walls. Thermal conductivity ranges from 0.020 to 0.023 W/m.K. It has the texture of glass tissue. The K5 provides a highly versatile application procedure and is easily accessible for utilisation as exterior wall insulation.
Roof Insulation
Heat is lost via the roofs of our houses and other structures. When not adequately insulated, condensation may form when they are subjected to moisture and rain. This could damage your infrastructure and harm your health. Roof insulation using Kooltherm k7 panels is utilised beneath tiles or slates. The K7 panel features a composite foil pattern with a thermal conduction spectrum of 0.020-0.023 W/m.K. There is a fine line between Kingspan TR27 and TR26 with glass tissue surfaces on either side.
In addition, vegetated and plain roofs may be adequately insulated with the N300R or H350R variants of Kingspan Styrozone. The dimensions of the boards are 1.25 by 0.6m. Because of its high compression property, H350R is widely used in all sorts of housing insulation applications. KingspanTP10 is also suitable for insulating pitched or heated roofs. The TP10 board is a polyiso panel with foil faces on both sides, comparable to the TF70 board.
Cavity Walls
Cavity walls are an area many individuals overlook throughout the insulation procedure, which causes many problems later on. You should not create this error and should immediately insulate your hollow walls. Kingspan k8 panel is a form of Kooltherm created specifically for cavity wall insulation. Thermal conductivity varies from 0.020 to 0.023 W/m.K. It has a composite foil texture. You may also choose the Kingspan k12 board, which offers decent results.
They feature a composite foil on both sides, which improves insulation. The Kooltherm series will always provide a better heat result than a conventional Polyiso board; therefore, knowing which is best is essential to determine which panel will fit your needs and budget.
In Summary
Kingspan has been servicing its consumers for numerous years and has a reputation for offering efficient services. They don’t want to sell; they want to meet their customers’ requirements and have a good connection with them. They never have issues, and when they do, Kingspan’s objective is to resolve the issue and make amends with the consumer by offering timely services if you have any problems at any moment, whether throughout the choosing process or the installation.